Audi

Fiscon Handsfree Bluetooth kit for the Audi RNS-E head unit.
The bluetooth kit comes with all of the necessary parts to allow a seamless plug-n-play installation if the vehicle is equipped with an OEM Quadlock connector. If the Quadlock connector is not present then an adapter may be needed and can be ordered seperately.
The same functionalaity as an OEM bluetooth module will be retained and the bluetooth functions are acessed through the RNS-E the same way an OEM system would be. The advantage of this module is that it has a smaller footprint and can therefore be more easily concealed/installed in more and smaller spaces. The included microphone can be routed and installed in the OEM headliner microphone space.
The kit includes the module with built in antenna, microphone, and the necessary connectors for OEM Quadlock installation.

This adapter is required when upgrading to a RNS-E or Concert III (also called the Symphony II+) head unit in a car that did not come equipped with the Quadlock connector system. Please use the Head Unit ID to identify your head unit before ordering.

This antenna is designed to work with the RNS-E and MFD-2 Navigation system. It may work with other devices as well but please check your system first for compatability. Stock length is approximately 5m.

Antenna adapter for RNS-E and Concert III conversions. This adapter is required when upgrading from Symphony II to RNS-E or Concert III.

The extension cable allows the use of the factory GPS receiver to be used with the RNS-E navigation unit. Actual connectors will vary from the image shown for this application.

This harness allows the installation of a OEM bluetooth module with the RNS-E navigation unit. The harness can also be integrated into the RNS-E adapter. Integration requires the purchase of an RNS-E adapter.

Antenna adapter for RNS-E and Concert III conversions from older head units. This adapter is required when upgrading from a Symphony I to RNS-E or Concert III.